Hatco Tips and Information!
Hatco Water Level Control BoardThe transformer may go bad or a solder joint is a common problem on circuit boards.
Hatco Warmer BulbWhen ordering replacement bulbs you may want to get a few extra to be safe!
Hatco ContactorWhen a contactor fails the transformer may fail or the points on the wire connectors may be bad.
Hatco Booster Heater ElementElements can burn out over time. If the element breaks apart during failure it is important to remove all particals from water tank.
Hatco Warmer Element RodTake special note of the voltage and wattage stamped in the element rod when replacing.
Hatco Booster Heater FusesIt is a good idea to have spare fuses on any equipment requiring them.
Hatco High Limit Cut OutThe high Limit is a safety that will shut down the system if thne unit is getting to hot.
Hatco KnobControl knobs can break or become dirty over time. Give your unit a fresh look with a new control knob.
Hatco Toaster MotorIf your conveyor has stopped moving the speed control may be bad or the motor is burnt out.
Copyright a1service.com 2010